If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The 8-bit PMD 85 personal computer produced in 1985–1990 by the Tesla company in the former socialist Czechoslovakia. This computer was produced locally
Tandy colour computer. tandy coco for short, I still have one... not sure if the dragons copied tandy or tandy copied the dragons, i suspect that neither did - most likely both used manu supplied sample designs to make the machine and both bought the same operating system......
I once saw a list of specs for 8-bit computers, many used similar off the shelf chips & other standard components.
I started with a ZX81 and went on to an Acorn Electron - great machine. True, it might have been a cut-down, slower BBC micro but they left a load of the good stuff in - most notably, BBC BASIC which was just the nuts. You could actually mix BASIC and 6502 assembly code, which finally allowed me to tackle the mysteries of machine code with some real debugging facilities. Unfortunately, machine code proved to be dead hard, and though I managed a few things such as a sidescroller subroutine and collision detector, most of it remained a mystery to me. Just what, exactly, was the stack pointer for? And what was I supposed to do with it? The prize for the less common machine, however, must go to one of my pals, who had a Texas Instruments TI-99/4A. I recall going round to his place to play some pretty run-of-the-mill games on it, and generally found the machine to be pretty uninspiring. It wasn't until a long time later that I discovered that this was actually one of the first 16-bit home micros.
Stack pointer.. Think of a pile of post it notes. Write a not stick it on the pile stack pointer increases,remove one it decreases. Want a note not on top? Set stack pointer to the level you want and get that note.
The TRS 80 is a moniker for several families of computers manufactured by Tandy / Radio Shack that were not software compatible with each other. Which particular models were sold in Tandy shops in Britain?
From memory (which is not as good as it was) of drooling over tandy catalogs and hanging around like a deranged nerd in the shops as a kid - all of them were available - usually mostly only in the catalogue, dont recall seeing them all in the shops.
REMEMBER HAVING THESE AT SCHOOL. BBC Micro. Acorn Technologies DONT THINK YOU COULD PLAY GAMES ON THESE OR THEY WERE VERY BASIC GAMES. ARE THEY 8 OR 16 BIT.
6502 processor so 8 bit, but they had a tube and could have a different processor, not sure if they could have a 16 bit one in place?
I think outside the bolded ones they were fairly uncommon. A mate of mine had a Toshiba MSX and I'd only ever knew 2 people who owned one. The Commodore 128 seemed quite rare. I don't think I've ever seen one in the flesh.
my dad owned a tosh msx, I remember playing on it and also not liking its microsh&te basic.
Tatung Einstein. It was originally intended as a business computer but ended up being more popular with programmers. They were manufactured in Bridgnorth in Shropshire. It was a rare example of a computer that used the 3 inch disk like that on the Amstrad CPC 6128. Sord M5. A very simple Japanese home computer that sold in very low numbers. I think that Sord also sold some business computers.
the einstein was a machine i drooled over. could never have afforded one back then, or even now lol.
The Sinclair QL was another potentially great computer aimed at the semi-pro market, but problems with the Microdrives & a few other supposedly "penny pinching" short cuts to keep the price down didn't help things.
Was an interesting machine, remember seeing them in whsmiths, and seeing pranksters turn them upside down and shake loose keys so they fell out
I did read somewhere the Dragons were based on the TRS 80.
Tandy colour computer. tandy coco for short, I still have one... not sure if the dragons copied tandy or tandy copied the dragons, i suspect that neither did - most likely both used manu supplied sample designs to make the machine and both bought the same operating system......
I started with a ZX81 and went on to an Acorn Electron - great machine. True, it might have been a cut-down, slower BBC micro but they left a load of the good stuff in - most notably, BBC BASIC which was just the nuts. You could actually mix BASIC and 6502 assembly code, which finally allowed me to tackle the mysteries of machine code with some real debugging facilities. Unfortunately, machine code proved to be dead hard, and though I managed a few things such as a sidescroller subroutine and collision detector, most of it remained a mystery to me. Just what, exactly, was the stack pointer for? And what was I supposed to do with it?
The prize for the less common machine, however, must go to one of my pals, who had a Texas Instruments TI-99/4A. I recall going round to his place to play some pretty run-of-the-mill games on it, and generally found the machine to be pretty uninspiring. It wasn't until a long time later that I discovered that this was actually one of the first 16-bit home micros.
Leave a comment: