In the late 1940s when ring mains became the new standard for wiring domestic and commercial building there were three competing plug and socket systems.
1. The rectangular pin system by MK that became the standard used today.
2. The Wylex system which consisted of a round earth pin in the centre then two flat pins to its right and left for live and neutral. The flat pins were slightly offset to prevent a plug from being inserted upsidedown. Wylex plugs are circular in shape.
3. The Dorman Smith system which consisted of a plug with three round pins. The earth pin was at the top and the live and neutral pins were at the bottom to the right and the left. The live pin was a fuse which screwed into the plug body. Dorman Smith plugs are roughly triangular in shape.
Did anybody have Wylex or Dorman Smith sockets at home or in buildings that they used?
1. The rectangular pin system by MK that became the standard used today.
2. The Wylex system which consisted of a round earth pin in the centre then two flat pins to its right and left for live and neutral. The flat pins were slightly offset to prevent a plug from being inserted upsidedown. Wylex plugs are circular in shape.
3. The Dorman Smith system which consisted of a plug with three round pins. The earth pin was at the top and the live and neutral pins were at the bottom to the right and the left. The live pin was a fuse which screwed into the plug body. Dorman Smith plugs are roughly triangular in shape.
Did anybody have Wylex or Dorman Smith sockets at home or in buildings that they used?
Comment